| Description |
Glasteel subpan is a fiberglass composite panel that is light yet strong. It is resistant to moisture and a wide variety of chemicals. It is designed not to rot, corrode or mildew.
|
| Use |
| Designed for use as a subpan liner in refrigerated trailers and truck bodies. |
Physical Properties |
| PROPERTY |
TYPICAL VALUE |
TEST METHOD |
| Flexural Strength |
26,096 psi |
ASTM D-790 |
| Flexural Modulus |
1,010,000 psi |
ASTM D-790 |
| Tensile Strength |
12,247 psi |
ASTM D-638 |
| Tensile Modulus |
950,000 psi |
ASTM D-638 |
| Izod Impact (Notched) |
9.6 ft lbs |
ASTM D-256 |
| Barcol Hardness |
43 |
ASTM D-2583 |
|
| Product design specifications |
| .060 |
White |
Up To 105" Wide |
Embossed |
.38 lbs sq ft |
|
| Notes |
| Glasteel subpan is available in bulk coil, 250 to 700 linear feet as well as cut-to-length sheets. Cut-to-length sheets can be interlapped into one coil for customer convenience. Material can also be coiled with embossed side facing inside or out. |
| Standards |
| All material tolerances and product specifications can be found in the Glasteel Quality Specification Data Sheet. Available upon request. |
| Aesthetics |
| Glasteel Transportation panels will provide a bright clean look when installed. Please note that periodically small areas that are unacceptable for use will be present on the panels. Glasteel will always do it’s best to identify these areas but user should always inspect panels prior to installation. If an unacceptable area is discovered, please notify Glasteel at once for replacement of the affected material. When verification is made, Glasteel will either reimburse or supply replacement material but in no means will cover labor, installation or handling expense. |
| Cutting |
| Glasteel Transportation Panels can be cut using power saws with a carbide tip or masonry blade. Use caution and always wear protective goggles and a filter mask when cutting panels. |
| Installation |
| Follow industry wide fastening procedures utilizing mechanical and / or adhesives. |
| Storage |
| All Glasteel Transportation Panels should be stored indoors in a cool dry area. Moisture permitted to remain trapped between panels can cause expansion and discoloration. |
| Maintenance |
To ensure that Glasteel Transportation Panels retain their sparkling clean looks, a periodic cleaning with warm soapy water or steam cleaning is recommended. |
| Nonwarranty |
| The information contained in this literature is presented in good faith, and is believed to be accurate at time of publication. No representation, guarantee or warranty is made as to the completeness, reliability or accuracy of this information. No implied warranty or merchantability or functional use for specific application. |
| |
![[]](../images/ingles/castellano_off.gif)
>> Products
![[]](../images/ingles/tit-glasteel-transportation.gif){kind=spacer}
